,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,Broadcast Tubes,Transmitting Tubes,Transmitting,Broadcast,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">



The GS-11 triode is used as an oscillating and amplifying tube in the centimetric and decimetric wavelength ranges.

Cathode: indirectly heated, oxide-coated.
Envelope: titanium-ceramic.
Height: at most 25.1 mm.
Diameter: at most 15.4 mm.
Mass: at most 5 g.

A - anode; C - grid; KP - cathode and heater; P - heater

Vibration loads:
frequency, Hz 5-400
acceleration, m/s² 98
frequency, Hz 400-2.000
acceleration, m/s² 196
Multiple impacts with acceleration, m/s² 1.470
Single impacts with acceleration, m/s² 4,900
Linear loads with acceleration, m/s² 980
Ambient temperature, °C -60 to +100
Relative humidity at up to +40 °C, % 98

Electrical Parameters
Heater voltage. V 6.3
Heater current, mA 275-310
Mutual conductance (at anode voltage 175 V and anode current 10 mA), mA/V, at least 9
Gain coefficient (at anode voltage 175 V and anode current 10 mA) 80-165
Operating point (negative grid voltage at anode voltage 175 V and anode current 10 mA), V 1.2-0.3
Interelectrode capacitance, pF:
input 2.1-3.5
output, at most 0.015
transfer 1-1.6
Warm-up time, s 15
Output power, W, min.:
at anode voltage 150 V. anode current 6 mA, wavelength at most 14.5 cm 0.1
over 1,000 h of service 0.08

Limit Operating Values
Heater voltage, V 6-6.6
Anode voltage, V 175
Grid voltage (negative), V, at least 30
Cathode current, mA 10
Grid current, mA 4
Dissipation, W:
anode 1.5
grid 0.1
Warm up time, s 15
Envelope temperature, °C 200
anode circuit, kil 2
heater circuit (to provide warm up time 15 s), Om 1
Vibration noise voltage (at frequencies 50-2,000 Hz with acceleration 98 m/s²), V 25

Averaged Anode Characteristic Curves:
Uf = 6.3V

Averaged Anode-Grid Characteristic Curves:
Uf = 6.3V

Averaged Characteristic Curves Showing Oscillator Output Power versus Anode Current:
Uf = 6.3V

Averaged Characteristic Curves Showing Oscillator Output Power versus Anode Current:
Uf = 6.3V