,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,Broadcast Tubes,Transmitting Tubes,Transmitting,Broadcast,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">



The GS-24B triode is used as an oscillator and power amplifier in grounded-grid circuits for continuous operation with anode modulation.

Cathode: indirectly heated, oxide-coated.
Envelope: metal-ceramic with ring leads.
Anode cooling: forced air.
Height: at most 69.5 mm.
Diameter: at most 35 mm.
Mass: at most 80 g.

A - anode; C - grid; KP - cathode and heater; P - heater

Vibration loads:
frequencies, Hz 5-2,500
acceleration, m/s² 147
Multiple impacts:
acceleration, m/s² 735
number of impacts 10,000
Ambient temperature, °C -60 to +125
Relative humidity at +40 °C, % 95-98

Electrical Parameters
Heater voltage (AC or DC), V 6.3
Heater current, A 0.38-1.38
Cutoff voltage (negative), V 13
Anode current, mA 60-125
Mutual conductance, mA/V 20-30
Penetration factor, % 0.8-1.5
Warm up time, s 60
Oscillator output power, W:
in continuous-wave generation 32
with heater voltage 11.3 V 26
interelectrode capacitance, pF:
input 7.3-10.5
transfer 2.9-3.7

Limit Operating Values
Heater voltage (AC or DC), V:
maximum 13.85
minimum 11.35
Maximum anode voltage (DC), V 900
Dissipation, W:
anode 120
grid 2.5
Maximum cathode current (DC component), mA:
in prolonged operation 250
in operation for not above 100 h 270
Grid current (DC component), mA:
at wavelength below 60 cm 50
at wavelength above 60 cm:  
prolonged operation 80
operation for not longer than 100 h 90
Minimum cathode heating time, s 60
Maximum temperature, °C:
anode 200
grid ring 140
cathode ring 140
Maximum resistance in grid circuit, kOm 1

Power Amplification
Anode voltage, V 350
Cathode current (DC component), mA 240
Grid current (DC component), mA 70
Oscillator output power, W 20
Operating frequency, MHz 100-400

Self-Sustained Oscillation
Anode voltage,V 800
Cathode current (DC component), mA 150
Grid current (DC component), mA 40
Oscillator output power, W 30
Operating frequency, MHz 600

Averaged Characteristic Curves:
_____ anode;
_ _ _ grid-anode

Averaged Anode-Grid Characteristic Curves:
_____ anode-grid;
_ _ _ grid