,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,Broadcast Tubes,Transmitting Tubes,Transmitting,Broadcast,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">

GU-92 B


The GU-92B tetrode is used in RF power amplifier circuits in stationary general-purpose RF equipment, including television transmitters.

Cathode: directly heated, carbonized thoriated tungsten.
Envelope: metal ceramic.
Cooling: forced air.
Working position: upright, anode down.
Height: at most 200 mm.
Diameter: at most 190 mm.
Mass: at most 15 kg.

A - anode; K1, K2 - cathode; C1 - grid 1; C2 - grid 2

Vibration loads:
frequencies, Hz 1-60
acceleration, m/s² 9.8
Multiple impacts with acceleration, m/s² 147
Ambient temperature, °C -10 to +55
Relative humidity at up to +25 °C without moisture condensation, % 98

Electrical Parameters
Filament voltage (AC or DC), V 9.5
Filament current, A 130-160
Peak anode current (at anode voltage 2 kV, grid 2 voltage 1 kV, grid 1 voltage 120 V), A 22
Mutual conductance (at anode voltage 2 kV, grid 2 voltage 1 kV and anode currents 6 and 8 A), mA/V, at least 60
Negative grid 1 cutoff voltage, absolute value (at anode voltage 8 kV, grid 2 voltage 1 kV, anode current 0.3 A), V at most 350
Static amplification factor (at anode voltage 2 kV, grid 2 voltages 1 and 1.2 kV, anode current 6 A), at least 4
Output power at black level (at bandwidth 8 MHz, frequency up to 250 MHz), kW, at least 15
Output power at sync pulse level (at bandwidth 8 MHz, frequencies up to 250 MHz), kW, at least 25
Interelectrode capacitance in common-grid circuit, pF:
input 120
output 24
transfer 0.15

Limit Operating Values
Filament voltage (AC or DC), V 10
Filament starting current (peak value,) A 300
Anode voltage (DC), kV 8
Grid 2 voltage, kV 1.2
Dissipation, W:
anode 25-103
grid 2 250
grid 1 120
Operating frequency, MHz 250
Envelope temperature at hottest point, °C 250

Averaged Anode-Grid Characteristic Curves:
Uf = 9.5V; Ug2 = 1.2kV

Averaged Grid Characteristic Curves:
Uf = 9.5V; Ug2 = 1.2kV

Averaged Grid Characteristic Curves:
Uf = 9.5V; Ug2 = 1.2kV