VI115/32
PULSE RECTIFIER TUBE
The VI115/32 rectifier tube is used as a charging element in pulse circuits
GENERAL
Cathode: indirectly heated, oxidecoated.
Working position: upright.
Envelope: glass.
Height: at most 130 mm.
Diameter: at most 75 mm.
Mass: at most 200 g
OPERATING ENVIRONMENTAL CONDITIONS  
Vibration loads:  
frequencies, Hz  1600 
acceleration, m/s²  59 
Multiple impacts with acceleration, m/s²  392 
Ambient temperature, °C  60 to +100 
Relative humidity at up to +35 °C, %  98 
BASIC DATA Electrical Parameters 

Heater voltage, V  6.3 
Heater current, A  5.46.6 
Peak anode current (at peak anode voltage 5 kV, anode pulse duration 5 µs, pulse frequency 200 Hz), A:  
at heater voltage 6.3 V, at least  15 
at heater voltage 5.7 V, at least  10 
Cathode heating time (at peak anode voltage 5 kV, anode pulse duration 5 µs, pulse frequency 200 Hz), s, at most 
60 
Anodecathode capacitance, pF, at most  5 
Limit Operating Values  
Heater voltage:  
maximum  6.9 
minimum  5.7 
Peak anode reverse voltage, kV  32 
Anode dissipation, W  80 
Peak anode current, A  15 
Warm up time, s, at most  60 
Maximum duration of anode reverse voltage pulse, µs  4 
Maximum reverse voltage 1/duty factor  500 
Bulb temperature, °C  300 
Averaged Peak Anode Characteristic Curve:
U_{f} = 6.3V