,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,Transmitting Pulse Tubes,Transmitting,Pulse,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">

GI-31

TRIODE

The GI-31 triode is used as a RF oscillator for pulsed operation with anode keying in the decimetric wavelength range.

GENERAL
Cathode: indirectly heated, oxide-coated.
Envelope: metal-ceramic.
Height: at most 35 mm.
Diameter: at most 25.8 mm.
Mass: almost 18g.

gi-31(1)00041.jpg
A - anode; C - grid; KP - cathode and heater; P - heater

OPERATING ENVIRONMENTAL CONDITIONS
Vibration loads:
frequencies, Hz 1-600
acceleration, m/s² 98
Multiple impacts with acceleration, m/s² 392
Single impacts with acceleration, m/s² 4,900
Linear loads with acceleration, m/s² 980
Ambient temperature, °C -60 to +100
Relative humidity at up to +35 °C, % 98

BASIC DATA
Electrical Parameters
Heater voltage (AC or DC), V 6.3
Heater current, A 0.9-1
Inverse grid current, µA, at most 2
Mutual conductance (at anode voltage 350 V, anode current 35 mA), mA/V, at least 15
Peak cathode emission current (at peak anode and grid voltages 200 V, pulse duration 4-6 µs), A, at least 15
Peak power output (at peak anode voltages 2.5 kV, peak anode current 2.1 A, pulse duration 3 µs), 1/duty factor 500, wavelength 14-14.5 cm) kW at least 1.5
Interelectrode capacitance, pF:
input 3.5
outut,at most 0.04
transfer 2-2.7

Limit Operating Values
Heater voltage, V 6-6.6
Peak anode voltage, kV 2.8
Dissipation, W:
anode 12
grid 0.5
Peak anode current, A 2.5
Peak grid current, A 1.3
Envelope temperature, °C 200
Warm up time, s 15
Operating frequency, MHz 2,100
Maximum pulse duration, µs, at most 3
Minimum 1/duty factor, at least 400

Standard Operating Conditions
(Anode Keying)
Heater voltage, V 6.3
Peak anode voltage, kV 2.5
Peak anode current, A 2.1
Pulse duration, µs 0.6-3
1/duty factor 500
Wavelength, cm, at least 14
Peak power output, W 1,500

gi-31(2)00051.jpg
Averaged Characteristic Curves in Pulsed Operation:
Uf = 6.3V; t = 1µs; frequency 2,000 imp/s

gi-31(2)00052.jpg
Averaged Anode-Grid Characteristic Curves in Pulsed Operation:
Uf = 6.3V; t = 1µs; frequency 2,000 imp/s

gi-31(3)00061.jpg
Averaged Characteristic Curves Showing Peak Oscillator Output Power versus Anode Voltage:
Uf = 6.3V

gi-31(3)00062.jpg
Averaged Characteristic Curves of Efficiency versus Anode Voltage:
Uf = 6.3V