,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,Broadcast Tubes,Transmitting Tubes,Transmitting,Broadcast,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">

GU-73P

TETRODE

The GU-73P tetrode is used for singlesideband power amplification at frequencies up to 250 MHz.

GENERAL
Cathode: indirectly heated, oxide-coated.
Envelope: metal ceramic.
Cooling: forced air.
Height: at most 150 mm.
Diameter: at most 101 mm.
Mass: almost 150g.

gu-73p(1)00051.jpg
1, 2 - heater; K -cathode; C1 - grid 1; C2 - grid 2; A - anode

OPERATING ENVIRONMENTAL CONDITIONS
Vibration loads:
frequencies, Hz 5-80
acceleration, m/s² 25
Multiple impacts with acceleration, m/s² 118
Linear loads with acceleration, m/s² 88
Lowest permissible ambient temperature, °C -60
Relative humidity at up to +40 °C, % 95-98

BASIC DATA
Electrical Parameters
Heater voltage (AC or DC), V 27
Heater current, A 4.55-5.15
Anode voltage, kV 1.7
Grid 2 voltage, V 250
Negative grid 1 bias voltage, V 18-40
Negative cutoff voltage, V, at most 120
Anode current, A 1.5
Grid 2 current, mA -130
Mutual conductance, mA/V, at least 65
Gain coefficient (grid 1 grid 2) 3-7
Voltage level of combination frequencies of third and fifth orders (at anode voltage 3 kV, grid 2 voltage 300 V, anode current 750 mA, grid 2 current at most 110 mA), dB, at most -30
Warm up time, s, at most 210
Oscillatory power under conditions of class AB1 (at anode voltage 3 kV, grid 2 voltage 300 V, anode current 750 mA, grid 2 current at most 110 mA), kW, at least 2.5
Interelectrode capacitance, pF, at most:
input 190
output 27
transfer 0.2

Limit Operating Values
Heater voltage, V 24.7-27.3
Anode voltage (DC), kV 3
Grid 2 voltage (DC), V 325
Negative grid 1 voltage, V 150
Anode dissipation, kW:
single-sideband signal amplification 2.5
TV signal amplification 3.5
Grid 2 dissipation, W 35
Grid 1 dissipation, W 5
Cathode current (DC component), A 2.2
Anode current (instantaneous value), A 7
Operating frequency, MHz 250
Temperature at anode, stem and seals, °C 200

gu-73p(3)00071.jpg
Averaged Anode Characteristic Curves:
Uf = 26V; Ug2 = 250V

gu-73p(3)00072.jpg
Averaged Anode Characteristic Curves:
Uf = 26V; Ug2 = 300V

gu-73p(3)00073.jpg
Averaged Characteristic Curves:
Uf = 26V; Ug2 = 250V;
_____ anode-grid;
_ _ _ grid 2;
_ . _ grid 1

gu-73p(3)00074.jpg
Averaged Characteristic Curves:
Uf = 26V; Ug2 = 300V;
_____ anode-grid;
_ _ _ grid 2;
_ . _ grid 1

gu-73p(3)00075.jpg
Averaged Grid-Anode Characteristic Curves:
Uf = 26V; Ug2 = 250 V;
_____ (Ig2);
- - - (Ig1)

gu-73p(3)00076.jpg
Averaged Grid-Anode Characteristic Curves:
Uf = 26V; Ug2 = 300V;
_____ (Ig2);
- - - (Ig1)